FEX 6000
Dust extractor -
230 and 400 Volt
Powerful central extraction plant with high air flow rate to collect and filter dry and hazardous dusts.
State-of-the-art control technology, thus adaptable to customer specific processes
High-performance filter cartridges with automatic compressed air cleaning
Easy disposal in "endless" plastic bag (ESD)
Optional: Atex in Zone 22, PreCoat, with 2 or 3 motors
Powerful central dust extractionwith a high air flow rate to collect and filter dry and hazardous dusts.
Specially developed for the reliable suction and filtration of dusts which occur during miscellaneous work processes.
Critical fine dusts are reliably aspirated and filtered.
Pneumatic filter cleaning via PLC controller.
The volume flow is stepless adjustable.
1st filter stage: Dust class M
M-filter cartridges polyester fleece, aluminium coated or with PTFE-membrane.
As Upgrade:
2nd filter stage: Dust class H
Absolute-cartridge filter (H13/H14)
Including filter differential pressure measurement for filter monitoring.
Longopac disposal:
“Endless”-plastic bag for easy and contamination-free disposal of the sucted material.
Longopac-hopper: Heavy duty flap or pneumatically operated discharge for very light dusts.
230 Volt version as well as such including UL-components and special voltages are available on request.
| Model | FEX 6000.2 | FEX 6000.3 | FEX 6000.5 | FEX 6000.6 | FEX 6000.7 |
| Motor assemblies (to be selected from) | |||||
| Engine power | 2.200 W (2 x 1.100 Watt) | 3.300 W (3 x 1.100 Watt) | 2.200 W (2 x 1.100 Watt) | 3.300 W (3 x 1.100 Watt) | 2.900 W (1.100 + 1.800 Watt) |
| Max. air flow rate | 950 m³/h | 1.480 m³/h | 440 m³/h | 650 m³/h | 520 m³/h |
| Negative pressure free blowing | 10.000 Pa | 10.000 Pa | 23.800 Pa | 23.800 Pa | 21.000 Pa |
| Air flow in operating condition approx.*) | 910 m³/h | 1.380 m³/h | 420 m³/h | 600 m³/h | 500 m³/h |
| Negative pressure in operating condition approx.*) | 9.500 Pa | 9.500 Pa | 22.800 Pa | 22.800 Pa | 20.000 Pa |
| Flushing gas tank for filter dedusting | 5 litres compressed air | 5 litres compressed air | 5 litres compressed air | 5 litres compressed air | 5 litres compressed air |
| Protection class | IP 54 (if exhaust air is connected) | IP 54 (if exhaust air is connected) | IP 54 (if exhaust air is connected) | IP 54 (if exhaust air is connected) | IP 54 (if exhaust air is connected) |
| Noise level | 73 dB(A) | 74 dB(A) | 73 dB(A) | 74 dB(A) | 74 dB(A) |
| Dimensions: L x W x H **) | 85 x 88 x 227-255 cm | 85 x 88 x 227-255 cm | 85 x 88 x 227-255 cm | 85 x 88 x 227-255 cm | 85 x 88 x 227-255 cm |
| Weight approx.**) | 215 kg | 220 kg | 215 kg | 220 kg | 220 kg |
| 230-Volt-I. No.: (50/60 Hz) | 054-8102 | 054-8103 | 054-8105 | 054-8106 | 054-8107 |
| 400-Volt-I- No.: (50/60 Hz) | 054-8109***) | 054-8110***) | 054-8111***) | 054-8112***) | 054-8113***) |
| Filter chamber suction connection (to be added) | |||||
| Suction inlet Ø 80 mm Filter chamber with 3 cartridge filters, Dust class M | -D80 054-8122 Length of filter 500 mm á 4,2 m² Total filter area=12,6 m² | ||||
| Suction inlet Ø 150 mm Filter chamber with 3 cartridge filters, Dust class M | -D150 054-8121 Length of filter 600 mm á 5,0 m² Total filter area=15,0 m² | ||||
| Upgrades (optional) | |||||
| Dust class “H”- 8,4 m² cartrdige filter | 054-8122 | ||||
| EX protection acc. to ATEX zone 22 | 054-8123 | ||||
| ESD-version | 054-8124 | ||||
*) Operating data including standard filter equipment in factory condition without further options such as spark trap, pipeline or H-upgrade, etc.
**) With regard to the standard version, varying according to the equipment
***)N-conductor required
Each of our devices can be adapted to your requirements. We offer suitable options for each model. In addition, you will of course also find the right accessories for your EVOTEC for purchase.
This is a selection of possible applications:
Grinding
Removal of dust after grinding.
Laser processing
Smoke and vapours by laser cutting, marking and engraving.
Packaging
Extraction of smoke during laser marking or edge trim
Polishing
EX-protected extraction of polishing and grinding dust.
EX-protection
Ex-protected industrial vacuum cleaners for suction of explosive substances and dusts.
Electronics
The decisive factors are ESD and conductivity.
Pharmaceuticals
Clean room conditions and laboratory areas.
Food
Cleanliness and hygiene are the top priority.
Fine dust
Depending in the fineness or hazard of the dust, filters of dust class M or H are required.
Smoke / Vapours
Large air volumes recommended for light fumes and vapours, as well as storage filters.
Powder coating
EX-protected extraction of paint and powder dusts
Accessories
Here you can find suitable accessories for FEX 6000
Filtration technology
FEX 6000: Multi stage filtration system
1.) Filter stage dust class M: M-cartridge filter
2.) Filter stage dust class H: HEPA filter cassette (H13/H14) as an upgrade.
PTFE cartridge filter dust class MFilter unit of 3 cartridges
Repurchasing for upgrade dust class H, filter cassette 497 x 497 x H150 mm, 8,4 m² filter area, dust class H13/H14, with handle an guide rollers.Filter cassette - Dust class H
Accessories and options
Longopac - disposal bag
Pneumatic gate valve
Vibratory motor for filter cleaning
Doses a filter aid into the extraction unit in fixed cycles. The filters are then coated with a “sacrificial layer” and thus are protected from e.g. sticky adhesions, which otherwise cannot be cleaned of the filter. The filter life cycle is being extended and the filtration results are improved.
PreCoat EVOMIN replacement containerPreCoat dosing unit
Signal light
10-pole or 16-pole plug connection
Remote ON/OFF via radio
Consulting
Do you have questions about the accessories or do you need help selecting the options? I will be happy to advise you by phone or email!
