Extraction in recycling and environmental technology
The efficient use of plants and raw materials is the economic goal in the recycling and environmental technology sector. With
- comminution
- promotion
- preparation
of raw materials in the production and recyclable material cycle, dust is produced which has to be extracted. For the safe extraction of dust hazardous to health, the appropriate dust class, possibly also explosion-protected equipment, must be observed.
Professional extraction technology from EVO-PRODUCTS is ideally suited for dust extraction from crushers and shredders.
Ideal for dry dust extraction in the recycling and environmental technology industry:
EP 1136
Engine power: 3,6 kW
Negative pressure: 210 mbar
Air flow: 490 m³/h
EP 2122 ECO / EP 2130 ECO
Engine power: 2,2 / 3,0 kW
Negative pressure: 300 – 340 mbar
Air flow: 330 m³/h
EP 2122 / EP 2130 / EP 2140 ECO / EP 2155 ECO
Engine power: 2,2 / 3,0 / 4,0 / 5,5 kW
Negative pressure: 300 – 340 mbar
Air flow: 330 – 500 m³/h
EP 2155 / EP 2175 ECO
Engine power: 5,5 / 7,5 kW
Negative pressure: 320 – 360 mbar
Air flow: 510 – 700 m³/h
EP 2175 / EP 21130
Engine power: 7,5 / 12,5 kW
Negative pressure: 320 – 420 mbar
Air flow: 700 – 1.100 m³/h
Robusto with dirt container
Engine power: 1,5 bis 7,5 kW
Negative pressure: 240 – 340 mbar
Air flow: 220 – 700 m³/h
Robusto with Longopac
Engine power: 1,5 bis 7,5 kW
Negative pressure: 240 – 340 mbar
Air flow: 220 – 700 m³/h
EP 312-60 compressed air
Power: 2 Compressed air ejectors
Negative pressure: 280 mbar
Air flow: 300 m³/h
Pre-separator
Various designs and sizes, e.g. BigBag filling, tipping container or folding floor container. For the pre-separation of large quantities of material and to protect the filter of the vacuum device.
To vacuum mud or liquids:
These stationary extraction units are available for suspended fine dust:
EP 2701/ 02/ 03
Engine power: 1 x/ 2x /3 x 1,1 kW
Negative pressure: 10.00 Pa
Air flow: 440 – 1.350 m³/h
EP 2815 - 2822
Engine power: 1,5 / 2,2 kW
Negative pressure: 3.300 – 3.5000 Pa
Air flow: 2.050 – 2.500 m³/h
FEX 6000
Engine power: 2,2 – 3,3 kW
Negative pressure: 10.000 – 23.800 Pa
Air flow: 440 – 1.480 m³/h
EP 2830 - 28110
Engine power: 3,0 – 11 kW
Negative pressure: 3.900 – 6.100 Pa
Air flow: 3.830 – 9.000 m³/h
