






FEX 1000 / FEX 2000
Smoke extraction system
Process adapted suction system for the extraction of smoke, vapours or airborne particles
Powerful EC-Turbine suitable for continuous operation(24/7), large air volume, stepless airflow control
Modern control technology with display of Device status and error messages, connection for remote ON / OFF control
Reliable filtration due to graduated combi filter system
Process-adapted suction system for the extraction of smoke, vapours or airborne particles
High quality standards-suitable for three-shift-operation. Comfortable filter change by 2-respective 3- cassette-system, each individually removable. Reliable filtration of airborne particles by the use of an graduated kombi filter system. Activated carbon in the main filter reduces odours in the exhaust air.
For the extraction of laser fumes, welding- and soldering fumes, cutting fume as well as differnt steams and solvents. Ec-Turbine can be used for continuous operation, for the suction of large air volumes to collect airborne particles. Suction with up to two hoses,or suction arm, hose connection at the back, top or the sides.
Modern control technology allows the continuously variable control of the suction power during operation. Easy and comfortable adaption to the individual needs by an intuitive control panel. Clear graphic display and large, multicolour LEDs for a quick overview of the device status, settings or error sources.
EX-protected according to ATEX for the secure suction in zone 22: Eqipment and parts of the device electrically conductive.
W3-design: including expanded metal filter as spark trap to avoid fire hazard
Included in delivery:
Initial euipment set Filter:
- Storage filter M5/F9
- HEPA filter H13/H14
- Activated carbon-Filter
Model | FEX 1000 | FEX 2000 | |
Voltage at 50/60 Hz. | Volt | 230 (or 110) | 230 (or 110) |
Power output | Watt | 1.100 | 1.100 |
Max. air flow free blowing at Turbine | m³/h | 350 | 350 |
Max. air flow in operation | m³/h | 200 | 200 |
Maximal length of suction hose | m | 12 (Ø 50 mm) | 12 (Ø 50 mm) |
Max. negative pressure | Pa | 10.000 | 10.000 |
1. Filter step storage filter | m² | F9 + G4 | 1,4 + 5,0 |
2. Filter step HEPA filter H13/H14 | m² | 2,8 | 5,6 |
3. Filter step activated carbon | kg | 3 | 5,8 |
Sound pressure level | dB(A) | 62 | 62 |
Weight | kg | 58 | 60 |
Dimensions | mm | 436 x 527 x 638 | 436 x 527 x 882 |
Type of protection | IP 55 | IP 55 | |
Operation temperature | °C | 5 – 40 | 5 – 40 |
Operating humidity (non condensing) | % | 10 – 90% | 10 – 90% |
Quality of stainless steel | VA | 14.301 | 14.301 |
EX-protection (electric. conductive) | Art-Nr. | 710-1111 | 710-1121 |
W3-design (Welding fumes) | Art-Nr. | 710-1113 | 710-1123 |
FEX 1000
FEX 2000
Each of our devices can be adapted to your requirements. We offer suitable options for each model. In addition, you will of course also find the right accessories for your EVOTEC for purchase.
This is a selection of possible applications:
Depending on the fineness or hazard of the dust, filters of dust class M or H are required.
Large air volumes recommended for light fumes and vapours, as well as storage filters.
EX-protected industrial vacuum cleaners for suction of explosive substances and dusts.
Accessories
Here you can find suitable accessories for FEX 1000 and 2000.
Filtration technology
FEX 1000: HEPA filters and adsorption filters consist of a stable MDF box with seal and are completely incinerable. Due to the seperate design, they can be combined to suit the application and disposed of separately depending on the load. As a storage filter, an empty frame can be equipped with suitable filter inserts as required. The use of an expanded metal filter is required for the W3 version. (In combination with storage filter empty frame + filter insert + expanded metal filter).
Overview


HEPA filter H13/H14 cassette
5,6 m² filter area, height 146 mm with seal.
Item No.: 074-20064-01
HEPA filter H13/H14

Adsorption filter activated carbon cassette
approx. 6 kg activated caron, height 146 mm with seal.
Item No.: 074-20063-01
Adsorption filter activated carbon

Combinated filter cassette H13/H14 and activated carbon
Height 146 mm with seal.
Consisting of: HEPA filter H13/H14, 2,8 m² filter area and adsorption filter activated carbon, approx. 3 kg activated carbon.
Item No.: 074-20087-01
Combinated filter cassette H13/H14 and activated carbon

Empty frame with strip for storage filter inserts
Free internal height 125 mm
Total height 146 mm
Item No.: 074-20065-01
Empty frame for storage filter inserts

Suitable storage filter inserts
Expanded metal filter
Height 15 mm – 074-20058
G4 fleece mat
Höhe 14 mm – 074-20082
G4-Z-Line 0,3 m² – Cardboard frame
Height 48 mm – 074-20083
G4-Z-Line 0,6 m² – Cardboard frame
Height 96 mm –074-20059
M5-Filter 0,8 m² – Cardboard frame
Height 48 mm – 074-20084
F9 Filter 2,2 m² – Plastic profile
Height 48 mm – 074-20085
H13 Filter 2,8 m² – Plastic profile
Heighht 48 mm – 074-20086
Suitable storage filter inserts
FEX 2000: HEPA filters and adsorption filters consist of a stable MDF ox with seal and are completely incinerable. Due to he seperate design, they can be combined to suit the application and disposed of separately depending on the load. There is a choice of various storage filter variants: Ready-made F9/M5 combinated filter cassette or various empty frames, which can be equipped with suitable filter inserts according to requirements.
Overview


Empty frame with F9-filter
Free internal height=145 mm
Total height=240 mm
F9=2,5 m²
Item No.: 074-20041-01
Empty frame with F9-filter

HEPA filter H13/H14 cassette
5,6 m² filter area, height 146 mm with sealing.
Item No.: 074-20064-01
HEPA filter H13/H14

Adsorption filter activated carbon cassette
Approx. 6 kg activated carbon, height 146 mm with sealing
Item No.: 074-20063-01
Adsorption filter activated carbon

Empty frame for storage filter inserts
Free internal height 200 mm
Total height 240 mm
Item No.: 074-20066-01
Empty frame for storage filter inserts

Suitable storage filter inserts
Expanded metal filter
Height 15 mm – 074-20058
G4 fleece mat
Höhe 14 mm – 074-20082
G4-Z-Line 0,3 m² – Cardboard frame
Height 48 mm – 074-20083
G4-Z-Line 0,6 m² – Cardboard frame
Height 96 mm –074-20059
M5-Filter 0,8 m² – Cardboard frame
Height 48 mm – 074-20084
F9 Filter 2,2 m² – Plastic profile
Height 48 mm – 074-20085
H13 Filter 2,8 m² – Plastic profile
Heighht 48 mm – 074-20086
Suitable storage filter inserts
Accessories and options

Vacuum and exhaust air hoses
Vacuum hose PUR black antistatic
Contact and surface resistance < 10⁹ Ohm, linear meter:
Ø 50 mm 072-10007
End sleeve electrically conductive
For PUR-vacuum hose, 1 piece
Ø 50 mm 072-10025
Exhaust air or vacuum hose PUR black antistatic
Can be used as exhaust air or vacuum hose, contact and surface resistance < 10⁹ Ohm, linear meter:
Ø 80 mm 072-10011
Ø 100 mm 072-10035
Vacuum and exhaust air hoses

Sealing plug
For vacuum input sealing, if requiered
Ø 50 mm 072-0609
Sealing plug

Adapter for vacuum hose connection
For installation on top of the device, including hose clamp.
Ø 50 mm 072-0620
Ø 80 mm 072-0603
Single wire clamps
For vacuum or exhaust air hoses, galvanized steel
Ø 50 mm 054-10090
Ø 80 mm 054-10091
Ø 100 mm 054-1092
Adapter for vacuum hose connection

Exhaust air hood with exhaust hose connection
Exhaust air hood with connection for exhaust hose
Ø 80 mm 072-0610
Ø 100 mm 072-0637
Exhaust air hood with exhaust hose connection

Spark trap with knitted metal inlay
Prevents sparks from being sucked in. To be integrated in pipe system or vacuum hose.
Ø 50 mm 072-0626
Ø 80 mm 072-0628
Matching metal knitted inlay for:
Ø 50 mm 072-0626-01
Ø 80 mm 072-0628-01
Spark trap with knitted metal inlay

Cyclone pre-separator ESD
For the pre-separation of larger quantities of fine dust. 28-l dirt container made of stainless steel, cyclone made of ESD plastic, connections Ø 50 mm.
28 litres container 053-1045
Cyclone pre-separator ESD

Stand set
To increase stability of the system, e.g. when vacuum arm is being used.
Set: 072-0350
Stand set

Power supply cable
With angled cold-device plug, 5 meters
with EU Schuko plug 072-0343
open ended 072-0130
Power supply cable

Mating connector for 8-pin socket
To connect with external controllers or devices for remote control, without cable.
Piece: 072-0621
Mating connector for 8-pin socket

Gas and particle sensor
As supporting monitoring unit to detectdemaged filters or saturated activated carbon. Attention: The unit has to be ordered together with machine.
Board unit: 072-0618
Test spray
Test spray for functional testing of gas and particle sensors
Can: 072-0625
Gas and particle sensor

Protective coating
In the upper housing area, recommended for the extraction of acidic vapours. Attention:To be ordered together with machine
Item No.: 072-0619-01
Protective coating

Filter change kit
For low-contamination disposal:
Filter coverage, slide-in for device lid, robust disposal bag, disposable gloves, dust mask.
Item No.: 072-0632
Filter change kit

Vacuum arms for table mounting
Standard vacuum arm
Including console for panel feedtrough
Ø 50 mm
Length 1.300 mm 072-0400
Length 1.500 mm 072-0401
Ø 75 mm
Length 1.300 mm 072-0402
Length 1.500 mm 072-0403
Vacuum arm ESD
Including console for panel feedtrough
Ø 50 mm
Length 1.300 mm 072-0400-ESD
Length 1.500 mm 072-0401-ESD
Ø 75 mm
Length 1.300 mm 072-0402-ESD
Length 1.500 mm 072-0403-ESD
Flexible ESD vacuum arm for table mounting
Including console for panel feedtrough
Ø 50 mm
Length 600 mm 072-0408-ESD
Flexible table console
Flexible holder for mounting on table tops or shelves. Supplied complete with two screw clamps. Suitable for:
For 072-0400-ESD: 072-0409-ESD
Universal for Ø 50 mm and Ø 75 mm
Standard: 072-0428
ESD: 072-0428-ESD
Vacuum arms for table mounting

Vacuum arms for ceiling or wall mounting
Standard vacuum arm
Without console
Ø 50 mm
Length 1.300 mm 072-0404
Length 1.500 mm 072-0405
Ø 75 mm
Length 1.300 mm 072-0406
Length 1.500 mm 072-0407
ESD vacuum arm
Without console
Ø 50 mm
Length 1.300 mm 072-0404-ESD
Length 1.500 mm 072-0405-ESD
Ø 75 mm
Length 1.300 mm 072-0406-ESD
Length 1.500 mm 072-0407-ESD
Wall console
Universal console for suction arm for wall mounting. Suitable for Ø 50 mm and Ø 75 mm.
Standard: 072-0427
ESD: 072-0427-ESD
Ceiling console
The holder also functions as an exhaust air duct. Unversally suitable for Ø 50 mm and Ø 75 mm.
Standard, length 250 mm: 072-0418
ESD, length 250 mm: 072-0418-ESD
Standard, length 1000 mm: 072-0421
ESD, length 1000 mm: 072-0421-ESD
Other designs or lengths are available on request.
Telescopic ceiling console
Can be extended up to 1000 mm. The holder also functions as an exhaust air duct. Unversally suitable for Ø 50 mm and Ø 75 mm.
Standard: 072-0426
ESD: 072-0426-ESD
Vacuum arms for ceiling or wall mounting

Hoods/Nozzles/Accessories
Flat hood 300 x 200 mm
Especially suitable for gases and vapours. High vacuum efficiency in vertical position to the table surface, including hood tube.
Standard Ø 50 mm: 072-0414
ESD Ø 50 mm: 072-0414-ESD
Standard Ø 75 mm: 072-0415
ESD Ø 75 mm: 072-0415-ESD
Nozzle, length 300 mm
For smaller, concentrated pollution sources, nozzle for increased vacum efficiency.
Standard Ø 50 mm: 072-0410
ESD Ø 50 mm: 072-0410-ESD
Standard Ø 75 mm: 072-0411
ESD Ø 75 mm: 072-0411-ESD
Flexible nozzle, length 600 mm ESD
High efficiency paired with high flexibiliy.
ESD Ø 50 mm: 072-0412
ESD Ø 75 mm: 072-0413
Round hood
Metal hood Ø 250 mm, including hood tube.
Standard Ø 50 mm: 072-0432
ESD Ø 50 mm: 072-0432-ESD
Standard Ø 75 mm: 072-0433
ESD Ø 75 mm: 072-0433-ESD
Straight hood tube
Spare part for hood, also suitable as straight inlet nozzle.
Standard Ø 50 mm: 072-0429
ESD Ø 50 mm: 072-0429-ESD
Standard Ø 75 mm: 072-0430
ESD Ø 75 mm: 072-0430-ESD
Reduction
Material=PP
Standard Ø 100-50 mm: 072-0416
ESD Ø 100-50 mm: 072-0416-ESD
Standard Ø 100-75 mm: 072-0417
ESD Ø 100-75 mm: 072-0417-ESD
Protective guard
For mounting in Ø 75 mm joint.
Standard Ø 75 mm: 072-0431
ESD Ø 75 mm: 072-0431-ESD
Hoods/Nozzles/Accessories
Consulting
Do you have questions about the accessories or do you need help selecting the options? I will be happy to advise you by phone or email!
