Extraction in power plants

Compliance with cleanliness and order in power plants reduces the risk of fire.  Especially in

  • Installation and assembly work
  • Maintenance and repair work

The workplaces should always be cleared up and cleaned promptly. Regular cleaning and removal of fire loads should be the rule. In order to avoid fire and explosion hazards, regular cleaning work must be carried out in areas where contamination occurs due to deposits of dry combustible dusts. Cleaning work must also be carried out immediately if the thickness of the dust layer is > 1 mm. If possible, EX-protected mobile or stationary vacuum cleaner systems should be used for the cleaning work.

Professional extraction technology from EVO-PRODUCTS is ideally suited for this application. Powerful suction power, highest quality, robust construction and best filter technology guarantee the safe extraction of materials and dusts from these applications.

These models meet all requirements – pay attention to the EX-protected version (Type 22):

Power: 1.5 kW
Voltage: 230 volts
Container: 25 liters
Continuous operation 24/7
EX-protection
Dust class M / H / Type22

Power: 1.5 kW
Voltage: 230 volts
Container: 35 liters
Continuous operation 24/7
EX-protection
Dust Classes: M / H / Type22

Power: 1.5 to 2.2 kW
Voltage: 230/400 volts
Container: 35 liters
Continuous operation 24/7
EX-protection
Dust Classes: M / H / Asbestos / Type22

Power: 2.2 to 3.0 kW
Voltage: 400 volts
Container: 60 liters
Continuous operation 24/7
EX-protection
Dust Classes: M / H / Type22

Power: 2.2 to 5.5 kW
Voltage: 400 volts
Container: 60 liters
Continuous operation 24/7
EX-protection
Dust Classes: M / H / Type22

Power: 4.0 to 7.5 kW
Voltage: 400 volts
Container volume: 100 liters
Continuous operation 24/7
EX-protection
Dust Classes: M / H / Type22

Power: 7.5 to 12.5 kW
Voltage: 400 volts
Container: 100 liters
Continuous operation 24/7
EX-protection
Dust Classes: M / H / Type22

Power: 1.5 to 7.5 kW
Voltage: 230/400 volts
Container: 35 to 100 liters
Continuous operation 24/7
EX-protection
Dust class: M / H / Asbestos / Type22

Power: 1.5 to 7.5 kW
Voltage: 230/400 volts
Disposal: Longopac
Continuous operation 24/7
EX-protection
Dust Classes: M / H / Asbestos / Type22

Power output: 1.5 to 4.0 kW
Voltage: 230 / 400 Volt
Disposal: Longopac or dirt container 35 litres
Continuous operation 24/7
EX-protection
Dust classes: M / H / Type22

Compressed air ejectors: 2
Consumption: 56m³ / h (at 4 bar flow pressure)
Operating pressure: 6-10 bar
Container: 120 liters
Endurance 24/7
EX protection for
Zones 1 + 2 and Zones 21 + 22

Compressed air ejectors: 2
Consumption: 56m³/h (at 4 bar flow pressure)
Operating pressure: 6-10 bar
Container: 60 litres
Continuous operation 24/7
EX-protection for
Zones 1 + 2 and zones 21 + 22
Dust classes: M / H

And for suspended fine dusts in ATEX zone 22, these stationary extraction systems are available

Central extraction system
Cartridge filter device
Power: 1.1 to 3.3 kW
Voltage: 230 or 400 volts
Continuous operation 24/7
Air volume: 450 to 1,360 m³ / h
Dust Classes M / H / Type22 (EX)

Central extraction system
Cartridge filter device
Power: 1.5 to 2.2 kW
Voltage: 400 volts
Continuous operation 24/7
Air volume: 2,050 to 2,500 m³ / h
Dust Classes M / H / Type22 (EX))

Central extraction system
Cartridge filter device
Power: 3.0 to 11.0 kW
Voltage: 400 volts
Continuous operation 24/7
Air volume: 3,800 to 9,000 m³ / h
Dust Classes M / H / Type22 (EX)