EP 2815/ 2822 Industrial extraction system
- For extracting free-flowing, dry dusts, as well as suspended dusts and fumes during Welding, grinding, polishing
- Powerful medium-pressure turbine suitable for continuous operation (24/7)
- Large air volume, frequency converter (FC) for volume flow control
- Large filter cartridges with automatic compressed air cleaning for long filter service life
- PreCoat as a filter aid (optional) for complicated dusts
Upgrade: Activated carbon module
Chamber with medium-pressure turbine IE3
Standard: Discharge grille - optionally left, right or rear
Option: Ø 200 mm exhaust air connection
Compressed air connection for pneumatic filter cleaning
Intake opening with Ø 150 mm flared connection piece - optionally left, right or rear
35 L dirt container with swivel castors
Option: PreCoat dosing unit for filter protection with sticky and complicated dusts
Option: exhaust air connection Ø 200 mm or Ø 150 mm at the top
Standard: Discharge grille - optionally left, right or rear
Option: Ø 200 mm exhaust air connection
Standard: Discharge grille - optionally left, right or rear
Option: Ø 200 mm exhaust air connection
Intake opening with Ø 150 mm flared connection piece - optionally left, right or rear
Intake opening with Ø 150 mm flared connection piece - optionally left, right or rear
Special version on customer request: EP 2822-IPA, especially for the extraction of isopropanol
Special version: EP 2815 Protect with pressure relief and fire extinguishing device
Areas of application
EX-protected extraction
Electronics industry
Fine dust extraction
Laser fume extraction
Food industry
Pharmaceuticals/ Chemistry
Polishing
Powder/paint dust extraction
Fume extraction
Sanding dust extraction
Welding/soldering fume extraction
| Assemblies | EP 2815 | EP 2822 | |
|---|---|---|---|
| 1.) Motor and control unit (select) | Watt | 1x1.500 | 1x2.200 |
| Voltage at 50/60 Hz. | Volt | 400 V – 3 ~ | 400 V – 3 ~ |
| Motor rated current max. | Amp | 3,0 | 4,0 |
| Air volume free blowing max. | m³/h | 2.050 | 2.500 |
| Vacuum max. | Pa | 3.300 | 3.500 |
| Operating air volume approx.*) | m³/h | 1.650 | 1.950 |
| Operating vacuum approx.*) | Pa | 2.800 | 3.200 |
| Protection class | IP 54 | IP 54 | |
| Sound pressure level | dB(A) | 67 | 67 |
| Suction connection | mm | Ø 150 mm (position optional) | Ø 150 mm (position optional) |
| Exhaust air | mm | Discharge grille (optional position) | Discharge grille (optional position) |
| Dirt container | l | 35 | 35 |
| Dimensions LxWxH **) | mm | 740x800x1970-2380 | 740x800x1970-2380 |
| Operating temperature | °C | 5-35 | 5-35 |
| Operating humidity | % | 10-70 | 10-70 |
| Weight approx. | kg | 180 | 182 |
| Type no. motor housing | 054-8031 | 054-8033 | |
| 2.) Filter unit dust class M (add) | |||
| “”M“ - 4 cartridges á 4,2 m² (16,8m²) ” | M4PF 054-8036 | M4PF 054-8036 | |
| “”M“ - 1 cartridge (10.0 m²) ” | M1PF 054-8037 | M1PF 054-8037 | |
| UPGRADES | |||
| Dust class “H14” filter cassette, 8.4 m² | H 054-8035 | H 054-8035 | |
| Activated carbon incl. 2 AK panels | AK054-8034 | AK054-8034 | |
| EX-Schutz nach ATEX Zone 22 | EX 054-8042 | EX 054-8042 | |
| ESD version electrostatically dissipative | ESD 054-8044 | ESD 054-8044 |
*) Operating data including standard filter equipment in factory condition without further options such as spark trap, duct or H-upgrade, etc. The operating point varies due to power setting and pipe design (Ø, length) as well as detection at the intake point.
**) Based on the standard version and varies depending on the device equipment
Powerful stationary industrial extraction system with high air volume for capturing and filtering dry and hazardous dusts
Ideal for extracting free-flowing, dry dust and fumes when Welding, grinding, polishing, cutting metals or plastics or at transfer stations.
High quality standards – maintenance-free, energy-efficient IE3 medium-pressure turbine suitable for 3-shift operation. Ideal for extracting large volumes of air to capture airborne dust – e.g. from laser cutting. Convenient lowering of the 35 l dirt container for easy disposal of the suction material. Modern cartridge filter system with resistant polyester filter with large filter surface in dust class M. Pneumatic and automatic cleaning of the cartridge filters for long filter service life. External compressed air connection required. Integrated impact separator for pre-separation of coarse suction material.
Options:
- PreCoat device for complicated dusts or to protect the filters in the case of sticky, adhesive dusts.
- with EX protection and suitable for use according to ATEX in Zone 22.
- Further protective measures, e.g: Relief valve or rupture disk available on request.
- ESD design: fully earthed; ESD powder coating; ESD feet/ castors
Energy-efficient control system that can be adapted to customer processes:
Speed control
The power of the system is set to a fixed speed (Hz. display).
Or optional:
Suction pressure control (PID)
The air volume requirement is determined by sensors in the system and the frequency inverter automatically regulates to the appropriate negative pressure (mbar display).
Assemble your system individually from these modules:
1. motor and control components
2nd filter chamber and disposal unit (35 l)
3. upgrades optional
Intake opening with flared connection piece Ø 150 mm can be positioned on the right, left or rear as required. Discharge grille can also be positioned on the right, left or rear. Options such as an exhaust spigot must be ordered separately.
Dirt container volume = 35 liters, optionally with fill level control
