In ATEX zone 2/22 – This ensures safe extraction!

ROBUSTO 3.0 kW and 5.5 kW ATEX application in Zone 2 and 22

Due to the demand of a major customer from the chemical industry for safe extraction in ATEX zones 2 and 22, we have extended our product range:

ROBUSTO 2130-LP “H” with Longopac system for ATEX zones 2 and 22            and
ROBUSTO 2155-LP “H” with Longopac system for ATEX zone 2 and 22.

The following technical features have been implemented:

  • Dust class H (H14)
  • Suitable for use in ATEX zone 2
    (A place in which an explosive atmosphere consisting of a mixture of air and flammable substances in the form of gas, vapour or mist is unlikely to occur in normal operation and, if it does occur, will occur only rarely and for a short period only.)
  • Suitable for use in ATEX zone 22
    (Area in which an explosive atmosphere in the form of a cloud of combustible dust in air is unlikely to occur in normal operation, but only for a short time if it does occur).
  • 3.0 kW and 5.5 kW – 400 Volt
  • Longopac disposal system
  • Air volume max: 330 m³/h and 480 m³/h
  • Negative pressure mbar 260/340 max.

Our Warehouse is ready.

1,200 m² more storage capacity in Diesel Street 5

Just in time for 01.07.2019 our new hall has been finished.

Construction started in September 2018. Despite the unfavourable weather the construction was completed in a relatively short time.


  • 1,200 m² storage capacity – high-bay warehouse
  • 1,000 pallet spaces
  • 2 fully equipped offices of 100 m² each

Container – suction unit

Suction box incl. 12,5kW side channel Blower, filter pre-separator and BigBag disposal

The container suction unit contains:

  • Suction box is a closed housing box with ventilation slots
  • 12,5 KW side channel blower and silencer
  • Frequency converter for infinitely variable regulation of the volume flow rate
  • SPS on board for filter control
  • Remote ON/OFF

Technical data of the side channel compressor:

  • Power = 12.5 kW / 400 Volt
  • Air volume max. = 1,100 m³/h
  • Vacuum 360 / 420 max.

The filter pre-separator contains:

  • 3x 5,0m² Dust class “M” Cartridge filter
  • With automatic compressed air cleaning for better separation performance and longer filter service life
  • Cyclone pre-separator for large quantities of dust
  • Mobile BigBag frame with height adjustment

We welcome our new Apprentice Mr. Hadi El-Kanj

A new Trainee in the team of EVO-PRODUCTS

We have hired one trainee again this year.

Mr. Hadi El-Kanj joined the EVO-PRODUCTS team on 01 August 2019.
He completes his apprenticeship as an industrial clerk.                                            

We are very happy that also in 2019 a motivated young person will be working for EVO-PRODUCTS again.

EVO-PRODUCTS Blankenburg GmbH starts his training.

We wish him a pleasant start into his professional life and much success with his apprenticeship in our company.


FEX 4000

EVO-PRODUCTS presents: FEX4000

The industrial world had Nuremberg fully under control again! This year POWTECH once again offered numerous new products and innovations.
EVO-PRODUCTS Blankenburg GmbH had the opportunity to present the new extraction system FEX 4000  on 3 days.

Design combined with technology – this was what EVO-PRODUCTS Blankenburg GmbH presented at POWTECH with various mobile smoke extraction systems.
Unique highlight at the fair, designed & manufactured by EVO-PRODUCTS – “FEX 4000”.

The FEX 4000 is a process-adaptable extraction system for the extraction of smoke, vapours or suspended dusts.

Permanently operational EC blowers for the extraction of large air volumes for the collection of suspended dusts

Device doors allow easy and low contamination replacement of cartridge and/or cassette filters.

Modern control technology enables infinitely variable regulation of the extraction performance during operation.

Would you like more information about our FEX 4000 or our FEX series?
Talk to us!